Weld-On 748ECO Pool Fast PVC adhesive for pools and spas, 473 ml
Weld-On 748ECO Pool Fast PVC adhesive for pools and spas, 473 ml
Weld-On 748ECO Pool Fast is a fast-setting PVC adhesive for swimming pool and spa piping. It is a solvent cement: rather than merely bonding surfaces, it fuses the PVC pipe and fitting into a single, solid unit, resulting in a joint as strong as the pipe itself.
Specially formulated for use in damp environments, it is suitable for repairs even when the pipe cannot be completely dried—making it ideal for pool and spa maintenance.
The adhesive is blue but dries clear, leaving the joint invisible. THF-free formula: 30% lower evaporation and significantly milder odor compared to standard solvent cements.
ADVANTAGES
• Maximum-strength joint
• Works in damp environments
• Fast setting—system can be filled shortly after application
• THF-free, low odor
• For pipes up to 160 mm in diameter
• Suitable for potable water systems
IMPORTANT:
Shake well before use.
Setting and final curing times depend on pipe diameter and air temperature; specific times are indicated on the packaging. In humid conditions, allow approximately 50% more time.
Never use in systems tested with compressed air or gas. Do not store or use near dry granular calcium hypochlorite — a violent chemical reaction may occur.
TECHNICAL DATA:
Type: Solvent-based PVC cement
Color: Blue; dries clear
Viscosity: Medium, from 500 cps
Specific gravity: 0.92
VOC content: Up to 405 g/l
Maximum pipe diameter: 160 mm
Schedule 80: Up to 110 mm
Shelf life: 3 years (tightly sealed)
Volume: 473 ml; brush in cap
